Smart Calibration - Microtek ScanWizard Industry Reference Manual

Table of Contents

Smart Calibration

This function allows you to skip the calibration when you perform the scans

with a same value of resolutions. For instance, if you wish to run all your scan

jobs at 200 dpi of the resolution, the system will only calibrate the scanner at

first time. After the first scan is done, this calibration data will be memorized

and kept for subsequent use. Therefore, you do not need to calibrate your

scanner every time when you press the Scan button.

This command is enabled only when the scanner model used supports this

function (i.e., MII-800XL Plus) ; otherwise, it will be grayed out in the Scanner

menu.

Note: The calibration data used for each resolution value will be erased once you exit

ScanWizard Industry each time.

Smart

This option enables you to perform the Smart Calibration function. By default,

this option is checked automatically when you activate the Smart Calibration

command.

Typical

This option can be used instead of the "Smart" if you like to calibrate your

scanner every time when scanning.

ScanWizard Industry Reference Manual

Table of Contents