Microtek ScanWizard Industry Reference Manual page 58

A. Adjust Command
The Adjust...
scan job. This command is enabled automatically when the ScanWizard Industry
is started up at the first time.
To use this command,
1.
2.
3.
B. Adding custom settings
The Add to Menu...
setting you have chosen to the current scan
job as a custom setting. You may retrieve
this custom setting later from the Darkness
drop-down menu. The darkness
adjustments are made from 0 to 10 in 1 up
increment.
To add a custom setting for darkness, click
Darkness and choose Add to Menu ... in the
drop-down menu. When a dialog box comes
up, give a setting from the range (0-10) and
enter the name to be added in the
description box; then click Save in the dialog
box.
54 ScanWizard Industry Reference Manual
Adjust... Adjust...
Adjust... command is an alternative way to give a darkness setting for a Adjust...
Click Darkness and choose Adjust... in its drop-down menu.
Point the mouse to the Darkness box. You will see an arrow appear in the
box.
Click and hold the arrow to adjust slider bar in order to increase/decrease
the value of a user setting. After you select your desired value, this value is
then memorized for subsequent use until a new value is selected and then it
will be taken over.
Add to Menu... Add to Menu...
Add to Menu... Add to Menu... allows you to save the