Microtek ScanWizard Industry Reference Manual page 35

B. Removing custom settings
Remove Settings... Remove Settings...
The Remove Settings... Remove Settings... Remove Settings... allows you to remove a
custom setting (or a factory preset setting)
from the list of settings available.
To remove a custom setting for an AIC tool,
click the Remove Setting...in that tool' s AIC pop-
up menu. When a dialog box comes up, select
the particular setting to be removed, then click
Remove in the dialog box.
C. Loading / retrieving user-defined AIC settings
To load or retrieve a custom setting that you have previously defined for an AIC
tool, go to that tool' s AIC pop-up menu, and choose the setting you wish to be
loaded.
ScanWizard Industry Reference Manual 31