Microtek ScanWizard Bio Reference Manual page 69

A.. Checked scan job: Checked scan jobs are the ones that are scanned when
you click the Smart-Scan button or Scan to button in the Preview window. To
check a scan job, you can either click the Check icon or use the Check
button at the bottom of the Scan Job Queue window.
B Current scan job: This is the current scan job, indicated by a frame around
the title. There may be several defined scan jobs, but only one scan job can
be current. In the Preview window, the current scan job is the one with the
flashing marquee.
C. Image type display: This shows the image type of the scan job .
D. Image size: This is the image size of the scan job.
E Title of scan job: The title of each scan job is shown. To edit a scan job title,
double-click the title of scan job and type a new name when an edit box
appears.
F . Selected scan job: The selected scan job is the highlighted item. You can
have multiple selected scan jobs, and clicking on a function button (such as
Check or Duplicate) will implement that function on the selected scan job.
G. One-pass Scan for Multiple Scan Jobs: This allows the scanner performs
scanning in a single pass for all the selected scan jobs.
H. Multiple Auto-crop for EZ-Lock Film Holder: This allows the scanner
automatically performs an Auto-crop after scanning multiple films at one
time.
D. Function buttons for controlling scan jobs: These buttons perform a
specific action on the selected scan job. The Duplicate, New, Delete, Check
and Load/Save buttons can be used on multiple selected scan jobs.
E. Thumbnail of prescan image: A thumbnail (
scan job after you click the Prescan button in the Preview window. This
means a prescan image is available for that scan job. This function is
available only in the Reflective mode.
) appears for the selected
Microtek ScanWizard Bio Reference Manual 63