Microtek ScanWizard Bio Reference Manual page 39

A. Scan Job: This shows the current scan job as indicated by the Scan
Job Queue window and by the selected image in the Preview window.
B. Type: This shows the image type of the current scan job.
C. Resolution settings: This area includes the following: the Resolution
box for specifying your output resolution; the Resolution list box
(with the arrow button) that provides predefined resolution values
for easier selection of the resolution setting; and the Resolution unit,
which lets you choose from ppi and several lpi options.
D. Scan Frame options: This area includes the Scan Frame settings
which represent the dimensions of the image that you wish to scan;
the Scaling factor for creating larger or smaller images from the
original source image; and the Output settings, which represent the
dimensions of the image when it is output.
E. Image size: This shows the size of the file when the image is scanned.
F . M. Sampling (Multiple Sampling): This lets you reduce the random
noise of the scanned image.
G: Advanced Image Correction (AIC): The Advanced Image Correction
(AIC) tools let you adjust and enhance the image, and image
corrections are displayed in real time. The AIC tools available for use
will vary, depending on the scan material chosen in the Preview
window.
H. Reset button: This button lets specify which settings in the Advanced
Image Correction (AIC) controls to be restored to their default
values.
I. Transform: This lets you flip the image horizontally or rotate the
image in increments of 90 degrees. This appears only when you are
prompted to perform the film scan without film holder.
J. Unit of measurement: This lets you chose your desired unit of
measurement, which will then be reflected in the rulers along side
the Preview window. Choose from inch, cm, mm, point, pica, or pixel.
Microtek ScanWizard Bio Reference Manual 33