Audio Settings - Kenwood KDC-U456 Instruction Manual

AUDIO SETTINGS

While listening to any source...
1
Press AUDIO to select [AUD CTRL].
2
Turn the volume knob to make a selection (see the table below), then press
the knob.
2
Repeat step until the desired item is selected or activated.
3
Press and hold to exit.
• To return to the previous hierarchy, press
KDC - U456 KDC - U356
Default: For /
KDC - 3357URM KDC - 3157UAM
/
KDC - U456 KDC - U356
For /
KDC - 3257UGM
For
SW LEVEL –15 to +15 (0):
1
BASS LVL –8 to +8 (+8* / 0*
1
MID LVL –8 to +8 (+2* / 0*
1
TRE LVL –8 to +8 (+3* / 0*
EQ PRO
BASS ADJ BASS FRQ
BASS LVL
BASS Q
BASS EXT
MID ADJ MID FRQ
MID LVL
MID Q
TRE ADJ TRE FRQ
TRE LVL
2
EQ NATURAL* / USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL*
Selects a preset equalizer suitable to the music genre. (Select [USER] to use the
customized bass, middle, and treble settings.)
.
KDC - U3056 KDC - 3257UGM
/ /
: XX
KDC - U3056
/ : XX* 1
KDC - 3357URM KDC - 3157UAM
/ / : XX*
Adjusts the subwoofer output level.
2
):
Adjusts the level to memorize for each source.
2
): (Before making an adjustment, select the source you
want to adjust.)
2
):
60/ 80/ 100/ 200: Selects the center frequency.
1 2
–8 to +8 (+8* / 0* ): Adjusts the level.
1.00/ 1.25/ 1.50/ 2.00: Adjusts the quality factor.
1
B-EX ON* : Turns on the extended bass. ;
2
B-EX OFF* : Cancels.
2 1
0.5K/ 1.0K* / 1.5K/ 2.5K* : Selects the center
frequency.
1 2
–8 to +8 (+2* / 0* ): Adjusts the level.
0.75/ 1.00/ 1.25: Adjusts the quality factor.
10.0K/ 12.5K/ 15.0K/ 17.5K: Selects the center
frequency.
1 2
–8 to +8 (+3* / 0* ): Adjusts the level.
B. BOOST
LOUDNESS
BALANCE
FADER
/
SW SET
DTIL SET
2
HPF
LPF SW
SW PHASE
SPRM SET
V-OFFSET
(Default : 0)
KDC - U456
Except for
• [SW LEVEL]/ [SW SET]/ [LPF SW]/ [SW PHASE] is selectable only if [SWPRE] is set to
[SWPRE SW]. (➜ 4)
1
:
• [SW LEVEL]/ [LPF SW]/ [SW PHASE] is selectable only if [SW SET] is set to [SW ON].
1
BB-L LV1* / BB-L LV2/ BB-L LV3: Selects your preferred bass boost
2
level. ; BB-L OFF* : Cancels.
2
LOUD LV1* / LOUD LV2: Selects your preferred low and high
frequencies boost to produce a well-balanced sound at a low volume
1
level. ; OFF* : Cancels.
L15 to R15 (0): Adjusts the left and right speaker output balance.
R15 to F15 (0): Adjusts the rear and front speaker output balance.
SW ON: Turns on the subwoofer output. ; SW OFF: Cancels.
KDC - U456
For :
HPF THRU: All signals are sent to the speakers. ; HPF 100HZ/
HPF 120HZ/ HPF 150HZ: Audio signals with frequencies higher than
100 Hz/ 120 Hz/ 150 Hz are sent to the speakers.
LPF THRU: All signals are sent to the subwoofer. ; LPF 85HZ/
LPF 120HZ/ LPF 160HZ: Audio signals with frequencies lower than 85
Hz/ 120 Hz/ 160 Hz are sent to the subwoofer.
PHAS REV (180°)/ PHAS NML (0°): Selects the phase of the subwoofer
output to be in line with the speaker output for optimum performance.
(Selectable only if a setting other than [LPF THRU] is selected for
[LPF SW].)
SPRM ON: Creates realistic sound by interpolating the high-frequency
components that are lost in AAC/MP3/WMA audio compression. ;
SPRM OFF: Cancels. (Selectable only when playing back an AAC/MP3/
WMA disc or a USB device, except iPhone/iPod.)
–8 to +8 (for AUX) ; –8 to 0 (for other sources): Presets the volume
adjustment level of each source. (Before adjustment, select the source
you want to adjust.)
:
ENGLISH | 9