Radio - Kenwood KDC-U456 Instruction Manual

RADIO

Search for a station
1 Press L SRC to select TUNER.
2
Press repeatedly (or press
*
FM2/ FM3/ MW/ LW/ SW1/ SW2.
"F1" / "F2" / "F3" / "MW" / "LW" / "S1" / "S2" appears on the display.
Press 4 / ¢ to search for a station.
3
•
To store a station: Press and hold one of the number buttons (1 to 6).
•
To select a stored station: Press one of the number buttons (1 to 6)
Change the frequency steps (for
You can change the frequency step of:
FM: 50 kHz to 200 kHz
MW: 9 kHz to 10 kHz
1
Press and hold L SRC to turn off the power.
2
While pressing number buttons 1 and 5, press L SRC.
Release your fingers from the buttons after the display appears.
• To restore the initial setting, repeat the same procedure.
• When the frequency step is changed, the previously stored stations in the
memory are deleted.
AM– / #FM+ on RC-406) to select FM1/
KDC - U456 KDC - U356 KDC - U3056
/ /
Direct Access Tuning (using RC-406)
1
Press AM– / #FM+ to select a band.
*
2
Press DIRECT to enter Direct Access Tuning.
"– – – • –" (for FM), "– – – –" (for MW/ LW/ SW1) or "– – – – –" (for SW2) appears on the
display.
3
Press the number buttons to enter a frequency.
Press 4 / ¢ (+) to search for a frequency.
4
• To cancel, press .
• If no operation is done for 10 seconds after step 3, Direct Access Tuning is
automatically canceled.
Other settings
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [SETTINGS], then press the knob.
3
Turn the volume knob to make a selection (see the table below and on page 6),
then press the knob.
4
Press and hold to exit.
)
LO.SEEK
LO.S ON: Searches only stations with good reception. (For
KDC - U3056
KDC - 3157UAM
Selects the tuning method for the 4 / ¢ buttons.
SEEKMODE
AUTO1: Automatically searches for a station. ; AUTO2: Searches for a preset station. ;
MANUAL: Manually search for a station.
A-MEMORY <Y>/N: Automatically starts memorizing 6 stations with good reception. ;
Y/<N>: Cancels. (Selectable only if [TYPE NML] is selected for [PRESET].) (➜ 4)
MONO SET Selectable only when the source is FM.
MONO ON: Improves the FM reception, but the stereo effect may be lost. ;
MONO OFF: Cancels.
KDC - 3257UGM
: MW/ SW1/ SW2 stations only ; For
: FM stations only.) ; LO.S OFF: Cancels.
Default: XX
KDC - U456 KDC - U356
/ /
KDC - 3357URM
/ /
ENGLISH | 5