Zone Control; Space Enhancer - Kenwood DNX7310BT Instruction Manual

Return to the Top page
Audio Setting Up

Zone Control

You can select different sources for both
front and rear positions in the vehicle.
1
Touch [Zone Control].
Zone Control screen appears.
2
Touch [Dual Zone].
3
Set each source as follows.
[3] (Front Source, Rear Source)
Select the audio source for each.
[∞], [5] (Rear VOL.)
Adjusts the rear channel volume.
[Single Zone]
Touch to turn off the dual zone function.
90 90
NOTE
• When the rear speaker sound is switched, the
audio source that is output at the AV OUTPUT
terminal is also switched to the same source.
• When the dual zone function is set to on, the
following functions are not available.
• Output from the subwoofer
• Subwoofer Level/Bass Boost
(P.87)
• Equalizer Control/Space Enhancer
/Listening Position
(P.88, 90, 92)
• DSP Bypass Control /Speaker
Setup/Car Type Setup
(P.86, 82, 85)

Space Enhancer

1
Touch [Space Enhancer].
Space Enhancer screen appears.
2
Touch [Small], [Large], or [OFF].
Each setting value indicates the
soundscape level.
NOTE
• This setting is not available during tuner source.
Return to the Top page
Audio Setting Up
91