Table of Contents
Advertisement
Call forwarding activated
Alarm clock activated
Roaming state
2.
Getting started
2.1. Removing the back cover
2.2. Inserting the UIM card
The mobile phone can only be used with the UIM card inserted. Press and hold the end key to switch off.
Insert the UIM card with the metallic contact downwards, sliding it into the slot as shown by the arrow, paying
attention to the position of the slanted angle. To remove the UIM card, slide the card out in the direction
shown.
Note: If the UIM card is removed without switching off the phone, phone will be powered off
automatically.
6
Advertisement
Table of Contents
