Replacing Belt - Panasonic MC-CG937 Operating Instructions Manual

Belt Path
Chemin de courrioe
Agitator
Ruta de la correa
Agitateur
Agitador End Cap
Capuchon d'extrémité
Tapa del extremo
Cover
Couvercle
Cubierta
Side Latch
Languette latérale
Pestillos laterales

Replacing Belt

Motor Shaft
Entraînement
du moteur
Impulsor del motor
Base
Base
Base
Rear Latches
Languette arrière
Pestillos traseros
➢ Install new belt in belt path on the
agitator assembly, then over the
motor shaft. See. CONSUMABLE
PARTS.
➢ Place agitator assembly back into
Power Nozzle.
➢ Line up front of cover and base.
➢ Rest cover on front edge of base
as shown.
➢ Tilt cover to back.
➢ Press cover firmly until latches
snap into place.
➢ Replace cover screws.
- 50 -