Monitoring Of Power Condition - Toshiba wt200 User Manual

AC adaptor
not
connected

Monitoring of power condition

As shown in the below table, the Batteryand Power indicators on the
system indicator panel alert you to the computer's operating capability and
battery charge status.
Battery indicator
Check the Battery indicator to determine the status of the battery pack.
The following indicator lights indicate the battery status:
Flashing amber
Amber
White
No light
If the battery pack becomes too hot while it is being charged, the charge
will stop and the Battery indicator will go out. When the battery pack's
temperature falls to a normal range, charging will resume - this process will
occur regardless of whether the computer's power is on or off.
User's Manual
Remaining
battery capacity
is above low
battery trigger
point
Remaining
battery capacity
is below low
battery trigger
point
Remaining
battery capacity
is exhausted
The battery charge is low, the AC adaptor must
be connected in order to recharge the battery.
Indicates the AC adaptor is connected and the
battery is charging.
Indicates the AC adaptor is connected and the
battery is fully charged.
Under any other conditions, the indicator does
not light.
Power on
• Operates
• LED:
Battery off
Power white
• Operates
• LED:
Battery
flashes amber
Power white
Computer shuts
down
TOSHIBA WT200
Power off
(no operation)
5-2