Memory Media Card - Toshiba wt200 User Manual

Problem
Slow performance

Memory Media Card

For further information, please refer to Chapter 3,
Problem
Memory media card
error occurs
You cannot write to
a memory media
card
You cannot read a
file
USB device
In addition to the information in this section, please also refer to the
documentation supplied with your USB device.
User's Manual
Procedure
The files on the Solid State Drive may be
fragmented - in this instance you should run the
disk Defragmentation utility to check the condition
of your files and the Solid State Drive. Please refer
to the operating system's documentation or online
Help File for further information on operating and
using the Defragmentation utility.
As a last resort you should reformat the Solid State
Drive and then reload the operating system and all
other files and data. If you are still unable to
resolve the problem, contact TOSHIBA Support.
Procedure
Remove the memory media card from the
computer and then reinsert it in order to ensure it is
firmly connected.
If the problem persists, then you should refer to the
documentation supplied with your memory media
card for further information.
Remove the memory media card from the
computer and check to ensure that it is not write
protected.
Check to ensure the required file is actually on the
memory media card that is inserted into the
computer.
If you are still unable to resolve the problem,
contact TOSHIBA Support.
TOSHIBA WT200
Operating Basics.
6-7