Setting Up Your Device; Adding Memory; Connecting To A Power Source - Toshiba Encore 10 User Manual

36
Getting Started

Setting up your device

Setting up your device
Your device contains a rechargeable main battery that needs
to be charged before you can use it.
To use external power or to charge the battery you must
attach the Micro USB/AC adaptor. See
power source" on page
NOTE

Adding memory

Toshiba will not be responsible for any product damage, data
loss, service or part replacement made necessary by
improper installation of a memory module.

Connecting to a power source

Your device requires power to operate. Use the Micro
USB/AC adaptor to connect the device to a live electrical
outlet, or to charge the device's battery.
TECHNICAL NOTE: You must complete all setup steps
up to and including
adding external or internal components to your device.
These components include, but are not limited to, a
mouse, keyboard, and printer.
Please handle your device carefully to avoid scratching or
damaging the surface.
Never pull on a power cord/cable to remove a plug from
a socket. Always grasp the plug directly. Failure to follow
this instruction may damage the cord/cable, and/or result
in a fire or electric shock, possibly resulting in serious
injury.
"Initial setup" on page 39
36.
before
"Connecting to a