Connecting The Ac Adaptor - Toshiba AT1S0 User Manual

■
Use a virus-check program and make sure it is updated regularly.
■ Never format storage media without checking its content - formatting
destroys all stored data.
■
It is a good idea to periodically backup internal storage of the tablet to
an external media. General storage media is not durable or stable over
long periods of time and under certain conditions may result in data
loss.

Connecting the AC adaptor

Use only the tablet connected to an AC power source or TOSHIBA Tablet
Dock to charge the battery. Never attempt to charge the battery with any
other charger.
The AC adaptor can automatically adjust to any voltage ranging from 100 to
240 volt and to a frequency of either 50 or 60 hertz, enabling you to use this
product in almost all country/region. The adaptor converts AC power to DC
power and reduces the voltage supplied to this tablet.
1. Replaceable plug (2-pin or 3-pin)
3. Power connector
5. Power cable
(Sample Illustration) The AC adaptor with power cable and repaceable plug
■
Depending on the model, either a 2-pin or 3-pin replaceable plug will be
bundled with the tablet.
■
The supplied power cable conforms to safety rules and regulations in
the region the tablet is bought and should not be used outside of this
region. In order to use the AC adaptor or tablet in other regions, you
should buy a power cable that conforms to the safety rules and
regulations in that particular region.
User's Manual
2. AC adaptor
4. USB connector
Getting Started
2-pin
3-pin
19