Invacare Pronto M91 User Manual page 88

8 SETUP/MAINTENANCE
15. Connect the joystick. Refer to Disconnecting/Connecting the Joysticks on page 104..

New battery(ies) MUST be fully charged before using, otherwise the life of the battery(ies) will be reduced.
16. If necessary, charge the battery(ies). Refer to Charging Batteries on page 57.
RED Connector from
Battery to Controller
RED Front POSITIVE (+) Battery
Terminal Mounting Screw, Nut and
Fuse Hardware
(Terminal Cap Shown)
RED Battery Connectors
RED Rear POSITIVE (+) Battery
Terminal Mounting Screw, Nut and Fuse
Hardware*
 Terminal cap shown
removed for clarity.
Invacare® Pronto® M91™
Front Battery
Tie Wrap
FIGURE 2 Installing/Removing the Batteries
Front of Wheelchair
Rear of wheelchair
88
RED Controller Connector
(Not Shown)
BLACK Front NEGATIVE (-) Battery
Terminal Mounting Screw, Nut and Fuse
Hardware
(Terminal Cap Shown)
Tie Wrap
BLACK Battery Connectors
GREY Rear NEGATIVE (-) Battery
Terminal Mounting Screw, Nut and Fuse
Hardware*
Rear Battery
Retaining Strap
Part No 1143153