Mpj+ Joysticks - Invacare Pronto M91 User Manual

MPJ+ Joysticks


For this procedure, refer to FIGURE 13.
Disconnecting
1. Pull the latch away from the joystick connector.
2. Disconnect the joystick connector from the remaining connectors
Connecting
Ensure the gaskets are installed in the top

connector cap and between network connectors.
1. Ensure the latch is pulled away from the network connector.
2. Connect the network connector to the other connectors.
3. Top and Bottom Connectors - Install connector caps onto the
network connector.
4. Push the latch in to secure the network connectors and caps.
5. If necessary secure excess cable using tie-wraps.
Part No 1143153
Top Connector
Cap
Network
Connectors
Controller
Cable
Bottom
Connector
Cap
FIGURE 13 Disconnecting/Connecting the Joysticks -
105
8 SETUP/MAINTENANCE
Latch
Gasket
Gasket
Gasket
MPJ+ Joysticks
Invacare® Pronto® M91™