Before You Call For Service - GE JTP95 Owner's Manual

Before You Call For Service...

Troubleshooting Tips
Problem
Lower oven control
signals after entering
cooking time or
delay start
Food does not bake or
roast properly in the
lower oven
Food does not broil
properly in the
lower oven
Clock and timer
do not work or
display goes blank
44
Possible Causes
You forgot to enter a
bake temperature or
cleaning time.
Oven controls improperly set.
Shelf position is incorrect
or the shelf is not level.
Incorrect cookware or
cookware of improper
size being used.
Oven thermostat needs
adjustment.
Door not open to the
broil stop position as
recommended.
Oven controls improperly set.
Improper shelf position
being used.
Cookware not suited
for broiling.
Aluminum foil used on the
the broiling pan and grid has
not been fitted properly and
slit as recommended.
In some areas the power
(voltage) may be low.
A fuse in your home may be
blown or the circuit breaker
tripped.
Controls improperly set.
The clock is in the
black-out mode.
What To Do
• Press the BAKE pad and desired temperature or the
SELF CLEAN pad and desired clean time.
• See the Using the lower oven section.
• See the Using the lower oven section.
• See the Using the lower oven section.
• See the Adjust the lower oven thermostat—Do it yourself!
section.
• See the Using the lower oven section.
• Make sure you press the BROIL HI/LO pad.
• See the Broiling Guide.
• Use the broiling pan and grid that came with your oven.
• See the Using the lower oven section.
• Preheat the broil element for 10 minutes.
• Broil for the longest period of time recommended in
the Broiling Guide.
• Replace the fuse or reset the circuit breaker.
• See the Using the clock and lower oven timer section.
for the lower oven clock.
• See the Display On/Off section for the microwave oven clock.
• See the Special features of your lower oven control
section for the lower oven clock.
• See the Display On/Off section for the microwave oven clock.