Before You Call For Service - GE JVM1660 Owner's Manual

Before You Call For Service
Problem PossibleCause What to Do
Oven will not A fuse in your home
start may be blown or the
circuit breaker tripped.
Power surge.
Plug not fully inserted
into wall outlet.
• Replace fl_se or reset circuit breaker.
• Unplug the microwave oven, then plug
it back in.
• Make sm:e the 3-prong plug on the
oven is riffle inserted into wall outlet.
Door not securely closed. • ()pen tile door ;rod close secm_elv.
"PLEASE INSERT Probe has been • Insert the probe properly into the
PROBE"appears forgotten or not o,en wul| oHllel.
on display inserted properly.
"SENSORERROR"
appears on display
When ushlg a Sensor
feature, the door was
opened before steam
could be detected.
Stemn was not detected
in ulaxhnum mnount of
thne.
Floor of the oven is
warm, even when
the oven has not
been used
The cooktop light is
located below the oven
floor. When the light
is on, the heat it
produces may make the
oven floor get warm.
• I)o not open door mnil steam is
sensed m)(t time is shown c(muting
down on
display.
• Use Time Cook to heat ]or more time.
• This is normal.
"BAD PROBE"
The probe has not been • Insert the t)robe t)rol)erl'} into tile
appears on display completely inserted into o\ e)l \v;l|l outh't.
the oven wall outlet.
Tile probe is defective. • Replace tile probe.
"LOCKED" appears
Tile conWol has been • Press ;rod hold C[ .EAR/( )FF tbr
on display locked, ul)out 3 se(onds to mido(-k Ill(' (-ol)tro].
Food amoont too Sensor Reheat is for • Use Time ('ook tbr |m'ge ml)o(mts
large for Sensor shNle servhlgs of of tbod.
Reheat
recouunended foods.
44