Replacing The Hard Disk Drive - Lenovo IdeaCentre A730 Hardware Maintenance Manual

Machine types: 10123/f0a0 [a730]
Table of Contents

Advertisement

Step 5.
Return the computer to an upright position, then lift the base cover up and slide it out as shown.
Step 6.
To reattach the base cover:
a.
Line up the base cover with the base, slide it back and snap it into position.
b.
Place the computer face-down on a soft flat surface, then secure the base cover to the base
with the 7 screws.

Replacing the hard disk drive

Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.
To replace the hard disk drive
Step 1.
Remove any media (disks, CDs, DVDs or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2.
Unplug all power cords from electrical outlets.
Step 3.
Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to "Left and right view"
and "Rear view" for help with locating the various connectors.
Step 4.
Remove the base cover. Refer to "Removing the base cover".
32
IdeaCentre A730Hardware Maintenance Manual

Advertisement

Table of Contents
loading

Table of Contents