Jenn-Air 30" (76.2 CM) Installation Instructions Manual page 15

7. Remove the bracket from the other side of the blower motor,
rotate 180° and secure with 4 locknuts.
8. Position 2 wood spacers and mount them to the floor.
Top View
B
A
A. 2" x 4" (5.0 x 10.2 cm) wood spacers
B. 2 " (7.3 cm) from back wall to edge of wood spacer
C. 8¾" (22.2 cm)
D. 2 " (5.8 cm) centerline of opening to wood spacer
C
D D
9. Mount blower motor to wood spacers using 4 - #8 x ¾" hex
head screws provided.
NOTE: Vent system will be connected after range has been
moved into it's final location. "See Connect Range to
Downdraft System" section.
B
A
A. Wood spacers
B. Mounting bracket
C. Blower
10. Go to the "Electrical Connection" section.
Top View
C
15