Install The Microwave Oven; Complete Installation; Assistance; Warning - Jenn-Air 24" (61.0 cm) Installation Instructions Manual

24" built-in microwave oven
Table of Contents

Advertisement

Available languages

Available languages

Install the Microwave Oven

WARNING

Excessive Weight Hazard
Use two or more people to move and install
microwave oven.
Failure to do so can result in back or other injury.
1. Empty microwave oven of any loose contents.
2. Using 2 or more people, slide microwave oven all the way into
the opening, and center the microwave oven.
3. Open the microwave oven drawer, and mark the 4 holes in the
mounting flange.
NOTE: The screw holes in the mounting flange of both sides must
be fully over the wood of the wall or cabinet.
4. Remove microwave oven.
5. Using 1/16" (1 mm) drill, drill 4 pilot holes into the cabinet
through the marks made in Step 3.
6. Prepare the holes by installing 1" screw in and out of each
pilot hole.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
7. With the microwave oven near the opening, plug the
microwave oven into the grounded 3 prong outlet.
8. Reinsert microwave oven into the opening, open the drawer,
and align holes in mounting flange with pilot holes in the
cabinet.
A. 1" mounting screws (4)
B. Mounting flange screw holes
C. Mounting flange
9. Install four 1" screws to secure the microwave oven in place,
then close the drawer.

Complete Installation

1. Check the operation of microwave oven by placing 1 cup
(250 mL) of water in the microwave oven and programming
cook time of 1 minute at 100% power.
2. If the microwave oven does not operate:
Check that a household fuse has not blown, or a circuit
breaker tripped. Replace the fuse or reset the circuit
breaker. If the problem continues, call an electrician.
Check that the power supply cord is plugged into a
grounded 3 prong outlet.
See the Use and Care Guide for troubleshooting
information.
Installation is now complete.
Save these Installation Instructions for future use.

ASSISTANCE

Call your authorized dealer or service center. When you call, you
will need the microwave oven model number and serial number,
both of which can be found on the model and serial number plate.
To access the model and serial number plate, fully open the
microwave oven drawer. The plate is located on a flat surface just
beyond the back wall of the drawer.
If you need additional assistance, call us at our toll free number or
visit our website listed in the Use and Care Guide.
A
B
C
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jmd2124wsJmd2124ws

Table of Contents