Microwave Oven Control; Touch Panel; Display Screen - Jenn-Air JMC2430LM Control Manual

Microwave Oven Control

This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or the Frequently Asked
Questions (FAQs) section of our website at www.jennair.com for more detailed instructions. In Canada, refer to the Customer Service
section at www.jennair.ca.
The microwave oven's controls are accessed through its control panel and interactive touch display.
NOTE: Due to the sensitivity of the control panel, we have provided special instructions for cleaning the panel as well as the touch panel.
See "General Cleaning" section in the Owner's Manual for cleaning instructions.
Dedicated Microwave Oven Models
A. Power
B. Kitchen Timer
C. Tools

Touch Panel

The touch panel houses the control menu and function controls.
The touch pads are very sensitive and require only a light touch to
activate.
For more information about the individual controls, see their
respective sections in this manual.
Welcome Guide
This appears on your display the first time the microwave is
powered up. The Welcome Guide allows you to set up your new
microwave oven.
After every selection, a tone will sound.
1. A new welcome screen will appear, please read it and touch
NEXT.
2. Select your language.
3. Select the clock by scrolling to the correct time in the hours
and minutes column. You can then select AM/PM or 24 hour
clock (military time). Touch NEXT.
4. Choose to have daylight savings time AUTO SYNC (turn on),
or DO NOT ADJUST (turn off). Touch NEXT.
5. Enter current date (MM/DD/YYYY) by scrolling to the column
to set the MONTH, DAY, and YEAR. Touch NEXT.
6. Select the units of temperature. You can choose Fahrenheit or
Celsius. Touch NEXT.
7. Select the Clock Theme by scrolling to the desired setting.
Touch NEXT.
NOTE: This is the background for the center touch display.
8. If you selected CLOCK ONLY, touch SAVE to complete the
setup.
or
If you selected a picture for the Clock Theme, select the
desired image and touch SAVE.
D. Add 30 Sec.
E. Microwave Cancel
Display
When the oven(s) is in use (active mode), the display shows the
oven temperature, heat source(s) and timer if set.
After approximately 2 minutes of inactivity, the display will go into
standby (sleep) mode, and the backlight of the display will dim.
When the oven is in operation, the display will remain active.
During programming, the display shows menus and the
appropriate selections for the respective cooking function.

Display Screen

1. The touch display screen is used to make menu selections,
adjust settings and input commands.
A. Cooking mode
B. Time – minute selection
C. Time – second selection
Menu selections and input adjustments are made in the center
portion of the screen, and the command inputs (Back, More, Start,
etc.) are made using the bottom buttons. Screen titles and
descriptions are displayed in the top portion of the screen. A light
to medium pressure touch of the fingertip will activate the menu
selection.
D. Turntable on/off menu
E. Start cooking cycle
F. Power level selection
3