Table of Contents
Advertisement
FRONT FORK
33. Install:
• Protector guide 1
NOTE:
Install the protector guide with its wider side a
facing downward.
Installation
1. Install:
• Front fork 1
NOTE:
• Temporarily tighten the pinch bolts (under
bracket).
• Do not tighten the pinch bolts (handle crown)
yet.
2. Tighten:
• Damper assembly 1
NOTE:
Use the cap bolt ring wrench 2 to tighten the
damper assembly with specified torque.
Cap bolt ring wrench:
YM-01501/90890-01501
3. Adjust:
• Front fork top end a
Front fork top end (standard) a:
Zero mm (Zero in)
5 - 41
CHAS
30 Nm (3.0 m · kg, 22 ft · lb)
Advertisement
Table of Contents
