Yamaha YZ450F(W) Owner's Service Manual page 528

Table of Contents

• Handlebar 1

• Handlebar holder (upper) 2

• Bolt [handlebar holder (upper)] 3

• The handlebar holder (upper) should be

installed with the punched mark a forward.

• Install the handlebar so that the marks b are

in place on both sides.

• Install the handlebar so that the projection c

of the handlebar holder (upper) is positioned

at the mark on the handlebar as shown.

• First tighten the bolts on the front side of the

handlebar holder (upper), and then tighten

the bolts on the rear side.

• Nut [handlebar holder (lower)] 1

28 Nm (2.8 m · kg, 20 ft · lb)

34 Nm (3.4 m · kg, 24 ft · lb)