Yamaha YZ450F(V) Owner's Service Manual page 526

Hide thumbs Also See for YZ450F(V):

Table of Contents

REMOVAL POINTS

Master cylinder

• Master cylinder bracket 1

• Master cylinder 2

• Do not let the master cylinder hang on the

• Keep the master cylinder cap side hori-

zontal to prevent air from coming in.

Blow in air between the handlebar or tube

guide and the grip. Then remove the grip

which has become loose.

• Handlebar 1

Bends/cracks/damage → Replace.

Do not attempt to straighten a bent handle-

bar as this may dangerously weaken the

ASSEMBLY AND INSTALLATION

• Handlebar holder (lower) 1

• Plain washer 2

• Nut [handlebar holder (lower)] 3

• Install the handlebar holder (lower) with its

side having the greater distance a from the

mounting bolt center facing forward.

• Apply the lithium soap base grease on the

thread of the handlebar holder (lower).

• Installing the handlebar holder (lower) in the

reverse direction allows the front-to-rear off-

set amount of the handlebar position to be

• Do not tighten the nut yet.

Show Quick Links

Table of Contents

2005 yz450f Yz450f 2006 Yz450fv 2006 Yz450f