Back Panel - HP Carrier-grade cc2300 Quick Start Manual

Back Panel

Figure 4 shows the back panel view of the system.
A
F G H
Figure 4. Back Panel DC Version, AC Version Shown at Right
Table 3. Back Panel Features
Item Description
A Three low profile, half-length 64-bit, 66 MHz PCI add-in board slots (3.3V riser board)
B DB-15 male connector for front panel alarm relay contacts
C Three full height, full length 64-bit, 33 MHz PCI add-in board slots (5V riser board), or,
Three full height, full length 64-bit, 66 MHz PCI add-in board slots (3.3V riser board)
D Redundant, hot-plug power supplies (AC and DC power supplies require different power supply
cages)
E Four-terminal DC input power connector for DC input power supply cage
F USB port 1
G Video connector
H External wide SCSI Ultra160
I Dual NIC 10/100 E/N RJ45 connectors NIC 1 (lower) and NIC 2 (upper)
†
J
PS/2 -compatible keyboard mouseport(requires PS/2 Y-cable to connect both keyboard and
mouse).
K Serial port (COM2), 8-pin RJ45 connector
L USB port 0
M Two ground lugs for attachment of grounding wire to chassis. Use only when configured with
DC power supply.
N and O AC input power connectors for AC input power supply cage (shown in inset)
16
B C
I J K L
†
68-pin connector
D E
M
HP cc3300 Carrier Grade Server
N
+
-
+
-
O
OM12818
Quick Start Guide