Mount The Microwave Oven; Adjust The Exhaust Adaptor; Connecting Ductwork - GE 39-40425 Installation Instructions Manual

A4. MOUNT THE MICROWAVE
OVEN (cont.)
3 Insert a self-aligning screw through top center
cabinet hole. Temporarily secure the oven by
turning the screw at least two full turns after the
threads have engaged. (It will be completely
tightened later.) Be sure to keep power cord tight.
Be careful not to pinch the cord, especially when
mounting flush to bottom of cabinet.
Cabinet Front
Cabinet Bottom Shelf
Microwave Oven Top
4 Insert 2 self-aligning screws
through outer top cabinet
holes. Turn two full turns on
each screw.
6
Tighten the outer two screws to the top of the
microwave oven. (While tightening screws, hold
the microwave oven in place against the wall and
the top cabinet.)
7 Install grease filter. See the Owner's Manual
packed with the microwave.
Installation Instructions
Filler Block
Equivalent
to Depth
of Cabinet
Recess
Self-Aligning Screw
5 Tighten
center
screw
completely.
14
A5. ADJUST THE EXHAUST
ADAPTOR
Open the top cabinet and adjust the exhaust adaptor
to connect to the house duct.
Damper
A6.

CONNECTING DUCTWORK

1 Extend the house duct down to connect to
the exhaust adaptor.
2 Seal exhaust duct joints using duct tape.
For Front-to-Back or
Side-to-Side Adjustment,
Slide the Exhaust
Adaptor as Needed
House Duct