Determining Rear Mounting Screw Locations - GE 39-40425 Installation Instructions Manual

DETERMINING REAR MOUNTING SCREW LOCATIONS

D.
CAUTION: Wear gloves
to avoid cutting fingers
on sharp edges.
1
Use a level to check that the template is positioned
accurately.
2 Locate and mark at least one stud on the left or right
side of the centerline. It is important to use at least one
wood screw mounted firmly in a stud to support the
weight of the microwave.
Mark three additional, evenly spaced locations for the
supplied toggle bolts.
Installation Instructions
NOTE: The Rear Wall Template serves
to position the bottom mounting plate and
to locate the horizontal exhaust outlet.
10
C L
3
Drill holes in the marked locations. If there is a stud,
" hole for wood screws. For holes that don't
drill a 3 ⁄
16
line up with a stud, drill a
NOTE: DO NOT MOUNT THE PLATE AT THIS TIME.
" hole for toggle bolts.
5 ⁄
8