Irf-Port Load-Sharing Mode; Irf-Port-Configuration Active - HP 6125XLG Command Reference Manual

irf-port load-sharing mode

Use irf-port load-sharing mode to configure a port-specific load sharing mode for an IRF port to
distribute traffic across its physical links.
Use undo irf-port load-sharing mode to restore the default.
Syntax
irf-port load-sharing mode { destination-ip | destination-mac | source-ip | source-mac } *
undo irf-port load-sharing mode
Default
The global IRF link load sharing mode applies.
Views
IRF port view
Predefined user roles
network-admin
Parameters
destination-ip: Distributes traffic across IRF member links based on destination IP address.
destination-mac: Distributes packets across IRF member links based on destination MAC address.
source-ip: Distributes packets across IRF member links based on source IP address.
source-mac: Distributes packets across IRF member links based on source MAC address.
Usage guidelines
To successfully configure a port-specific load sharing mode for an IRF port, make sure you have bound
at least one physical port to the IRF port.
You can configure an IRF port-specific load sharing mode to include a combination of multiple criteria for
making traffic distribution decisions. For example, criteria could include source MAC address and IP
address. If your device does not support a criterion combination, the system displays an error message.
If you configure the port-specific load sharing mode multiple times on an IRF port, the most recent
configuration takes effect.
An IRF port preferentially uses the port-specific load sharing mode. If no port-specific load sharing mode
is available, it uses the global load sharing mode.
Examples
# Configure a port-specific load sharing mode for IRF port 1/1 to distribute traffic based on destination
MAC address.
<Sysname> system-view
[Sysname] irf-port 1/1
[Sysname-irf-port1/1] irf-port load-sharing mode destination-mac

irf-port-configuration active

Use irf-port-configuration active to activate IRF ports.
16