Display Irf Configuration - HP 6125XLG Command Reference Manual

Field
Description
The Bridge MAC of the
IRF is
Auto upgrade
MAC persistent
Domain ID
Related commands

display irf configuration

•
• display irf topology
display irf configuration
Use display irf configuration to display basic IRF settings, including the current member ID, new member
ID, and physical ports bound to the IRF ports on each IRF member device. The new member IDs take
effect at reboot.
Syntax
display irf configuration
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display basic IRF settings.
<Sysname> display irf configuration
MemberID
Description
Description you have configured for the member device.
•
If no description is configured, this field displays a dashed line (-----).
•
If the description exceeds the maximum number of characters that can be
displayed, an ellipsis (...) is displayed in place of the exceeding text. To display
the complete description, use the display current-configuration command.
Bridge MAC address of the IRF fabric.
Status of the software auto-update function:
•
yes—Enabled. The master automatically propagates its software images to the
device you are adding to the IRF fabric.
•
no—Disabled. You must manually make sure the joining device uses the same set
of software images as the master. If not, the new device cannot join the IRF
fabric.
IRF bridge MAC persistence setting:
•
6 min—Bridge MAC address of the IRF fabric persists for 6 minutes after the
master leaves.
•
always—Bridge MAC address of the IRF fabric does not change after the master
leaves.
•
no—Bridge MAC address of the new master replaces the original one as soon
as the old master leaves.
Domain ID of the IRF fabric. The domain ID you assign to an IRF fabric must uniquely
identify the fabric in a multi-IRF fabric network.
NewID IRF-Port1 IRF-Port2
2