Irf Member Renumber - HP 6125XLG Command Reference Manual

Parameters
member-id: Specifies an IRF member ID in the range of 1 to 10.
priority: Sets priority in the range of 1 to 32. The greater the priority value, the higher the priority. A
member with higher priority is more likely to be the master.
Usage guidelines
Change member priority assignment to affect the maser election result.
To display the ID and priority settings of IRF members, use the display irf command.
Examples
# Set the priority of IRF member 2 to 32.
<Sysname> system-view
[Sysname] irf member 2 priority 32
Related commands
irf priority

irf member renumber

Use irf member renumber to change the IRF member ID of a device.
Use undo irf member renumber to restore the previous IRF member ID of the device.
Syntax
irf member member-id renumber new-member-id
undo irf member member-id renumber
Default
IRF member ID is 1.
Views
System view
Predefined user roles
network-admin
Parameters
member-id: Specifies the ID of an IRF member, in the range of 1 to 10.
new-member-id: Assigns a new ID to the IRF member, in the range of 1 to 10.
Usage guidelines
CAUTION:
Changing the IRF member ID of a device can cause losses of member ID-related configurations, including
settings on physical ports, at reboot.
To have the new ID take effect, you must reboot the IRF member.
When adding a device into an IRF fabric, you must assign a unique IRF member ID to the device. If its IRF
member ID has been used in the IRF fabric, the device cannot join the IRF fabric.
13