HP 6125XLG Configuration Manual page 171

[SwitchD-Vlan-interface101] ipv6 pim dm
[SwitchD-Vlan-interface101] quit
[SwitchD] interface vlan-interface 102
[SwitchD-Vlan-interface102] ipv6 pim dm
[SwitchD-Vlan-interface102] quit
Verifying the configuration
# Display IPv6 PIM information on Switch D.
[SwitchD] display ipv6 pim interface
Interface
Vlan300
Vlan103
Vlan101
Vlan102
# Display IPv6 PIM neighboring relationship on Switch D.
[SwitchD] display ipv6 pim neighbor
Total Number of Neighbors = 3
Neighbor
FE80::A01:101:1 Vlan103
FE80::B01:102:2 Vlan101
FE80::C01:103:3 Vlan102
Assume that Host A needs to receive the information addressed to IPv6 multicast group FF0E::101. After
IPv6 multicast source 4001::100/64 sends IPv6 multicast packets to the IPv6 multicast group, an SPT is
established through traffic flooding. Switches on the SPT path (Switch A and Switch D) have their (S, G)
entries. Host A sends an MLD report to Switch A to join IPv6 multicast group, and a (*, G) entry is
generated on Switch A. You can use the display ipv6 pim routing-table command to display the IPv6 PIM
routing table information on each switch. For example:
# Display IPv6 PIM multicast routing table information on Switch A.
[SwitchA] display ipv6 pim routing-table
Total 1 (*, G) entry; 1 (S, G) entry
(*, FF0E::101)
Protocol: pim-dm, Flag: WC
UpTime: 00:01:24
Upstream interface: NULL
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface100
(4001::100, FF0E::101)
NbrCnt HelloInt
0 30
0 30
1 30
1 30
Interface
Protocol: mld, UpTime: 00:01:20, Expires: -
DR-Pri DR-Address
1 FE80::A01:201:1
(local)
1 FE80::A01:201:2
(local)
1 FE80::A01:201:3
(local)
1 FE80::A01:201:4
(local)
Uptime Expires Dr-Priority
00:04:00 00:01:29 1
00:04:16 00:01:29 3
00:03:54 00:01:17 5
164