Table of Contents
Advertisement
Configuring the Switch for SSH
Operation
SSH-Related Commands in This Section
show ip ssh
show crypto client-public-key [<manager | operator>]
[keylist-str] [< babble | fingerprint >]
show crypto host-public-key [< babble | fingerprint >]
show authentication
crypto key < generate | zeroize > ssh [rsa]
ip ssh
port < 1 - 65535|default >
timeout < 5 - 120 >
aaa authentication ssh
login < local | tacacs | radius | public-key >
< local | none >
enable < tacacs | radius | local >
< local | none >
copy tftp pub-key-file <tftp server IP> <public key file>
[<append | manager | operator>]
clear crypto client-public-key [keylist-str]
1. Assigning a Local Login (Operator) and
Enable (Manager) Password
At a minimum, ProCurve recommends that you always assign at least a
Manager password to the switch. Otherwise, under some circumstances,
anyone with Telnet, web, or serial port access could modify the switch's
configuration.
To Configure Local Passwords. You can configure both the Operator and
Manager password with one command.
Syntax:password < manager | operator | all >
Configuring Secure Shell (SSH)
Configuring the Switch for SSH Operation
Page
6-17
6-25
6-14
6-21
6-11
6-16
6-16
6-16
6-18, 6-20
6-18
6-18
6-18
6-25
6-26
6-9
Advertisement
Table of Contents
