Spacelink Access Point Specifications - Asus SpaceLink WL-300 User Manual

Spacelink
Hide thumbs Also See for SpaceLink WL-300:
Table of Contents

Advertisement

Appendix

SpaceLink Access Point Specifications

The following technical specification is for reference purposes only. Actual
product's performance and compliance with local telecommunications
regulations may vary from country to country. ASUS will only ship products
that are type approved in the destination country.
Ethernet Interface
Data Rate
Modulation
Technology
RF Output Power
Antenna
Range
Receiver Sensitivity
Operating Frequency 2.412 to 2.462 GHz (North America)
WEP
Utilities
52
RJ45 for 10BaseT with auto crossover MDI/MDI-X
11 Mbps with auto fallback to 5.5, 2 and 1 Mbps
CCK (11Mbps, 5.5Mbps), DQPSK (2Mbps), DBPSK (1Mbps)
Direct Sequence Spread Spectrum
14 ~ 17 dBm (at nominal temperature range)
2 internal polarization diversity dipole antennas,
One RF connector for optional external antenna
Indoor 130 ft (40 m), semi-open 330 ft (100 m),
outdoor (LOS, Light-Of-Sight) 1500 ft (457 m) at 11Mbps
The range may vary by different environment
Per< 8% @ length=1024 octets (at nominal temp. range)
11Mbps: -82 to -85 dBm; 5.5Mbps: -85 to -88 dBm;
2 Mbps: -88 to -91 dBm; 1 Mbps: -91 to -93 dBm
2.412 to 2.484 GHz (Japan)
2.412 to 2.472 GHz (Europe ETSI)
2.457 to 2.462 GHz (Spain)
2.457 to 2.472 GHz (France)
64/128-bit WEP; each includes 4 user-defined keys
AP Manager: User-friendly utility for discovering and
configuring SpaceLink Access Points with Access
Control List features
AP Live Update: Download the newest firmware from
the Internet
SpaceLink Access Point

Advertisement

Table of Contents
loading

Table of Contents