Rear View - Samsung SmartCam SNH-1010N User Manual

Side View

Rear View

WPS Button
Used to connect to the Wireless
Access Point
Privacy button
Press once to stop transmitting
video/audio
Press and hold for 5sec to reset
the camera to default settings
DC 5V Power Input
Network port
Used if WPS is not supported on
the Wireless Access Point or if
you do not have a Wireless
Access Point
Power Supply
Plug-in the camera power adapter to the wall outlet and connect the camera as
shown.
n
Make sure to use the provided power adaptor. Otherwise, the product may not
`
operate properly.
It will take about 1min for the camera to boot-up completely.
`
When the boot-up is complete, the power LED color will change from red to
`
white.
01