Samsung SmartCam SNH-1010N User Manual page 10

3. Adjust the camera's shooting angle as appropriate (left and right) and
tighten the screws on the bottom of the bracket.
n
You can also use a coin or flat-head screwdriver to tighten them.
`
4. Adjust the camera's shooting angle (top
and bottom).
n
Do not put excessive force. Otherwise, it
`
may cause damage to the camera.
If you use the camera in contact with the
`
base unit, this may cause noise on the
video. It is advisable to use the camera in a
5º to 10º tilt.
10 · English
5. Plug in the power cable and arrange the cables through the bracket
holes.
n
When done, remove the protective film from the lens.
`