Attaching The Front Panel; Resetting The Microprocessor; About The Xm Ready Mark - Pioneer FH-P4000 Operation Manual

Before You Start
2 Grab the front panel and remove.
Grab the left side of the front panel and pull
away to the right. The front panel will be
detached from the head unit.
3 Put the front panel into the protective case
provided for safe keeping.

Attaching the front panel

1 Place the front panel flat against the head
unit.
2 Press the front panel into the face of the
head unit until it is firmly seated.

Resetting the microprocessor

The microprocessor must be reset under the
following conditions:
• Prior to using this unit for the first time after
installation
• If the unit fails to operate properly
• When strange or incorrect messages appear
on the display
1 Remove the front panel.
See Removing the front panel on the previous
page.
2 Press on the head unit with a pen
RESET
tip or other pointed instrument.
button
RESET

About the XM READY mark

The XM READY mark printed on the front panel
indicates that the Pioneer XM tuner (sold sepa-
rately) can be controlled by this unit. Please
inquire to your dealer or nearest authorized
Pioneer service station regarding the XM tuner
that can be connected to this unit. For XM tuner
operation, please refer to the XM tuner owner's
manual.
Notes
• XM Satellite Radio is developing a new band
of radio in the U.S.A.
The system will use direct satellite-to-receiver
broadcasting technology to provide listeners
in their cars and at home with crystal-clear
sound seamlessly from coast to coast. XM will
create and package up to 100 channels of
digital-quality music, news, sports, talk and
children's programming.
• When this unit is connected to a XM tuner,
only one additional external unit can also be
connected. Please see page 10 for more infor-
mation about the external unit.
Section
01
7
En