Introduction Of Advanced Built-In Cd Player Operation - Pioneer FH-P4000 Operation Manual

Section
Built-in CD player
06
3 Use
VOLUME
When you press
raised and when pressed down/–, the volume is
lowered.
4 To perform fast forward or reverse, press
and hold 2 or 3 .
5 To skip back or forward to another track,
press 2 or 3 .
Pressing 3 skips to the start of the next track.
Pressing 2 once skips to the start of the current
track. Pressing again will skip to the previous
track.
Notes
• The built-in CD player plays one, standard,
12-cm or 8-cm (single) CD at a time. Do not
use an adapter when playing 8-cm CDs.
• Do not insert anything other than a CD into
the CD loading slot.
• If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press
CD EJECT
the disc for damage before inserting the disc
again.
• If the built-in CD player does not operate prop-
erly, an error message such as
be displayed. Refer to Understanding built-in
CD player error messages on page 46.
20
En
to adjust the sound level.
up/+, the volume is
VOLUME
to eject the disc, and check
CD ERR-14
Introduction of advanced built-in
CD player operation
LOUD LOUD
1
6
may
2
5
1
ENT ENT DISP DISP
D
SOURCE / OFF SOURCE / OFF
2 3 4 5 6
5 3
3
4
2
CLOCK CLOCK
F
A
4