Pausing Cd Playback; Using Disc Title Functions; Entering Disc Titles - Pioneer FH-P4000 Operation Manual

Section
Built-in CD player
06
Press
FUNCTION
display.
2 Press 5 to turn scan play on.
appears in the display. The first 10
T.SCAN :ON
seconds of each track is played.
3 When you find the desired track press ∞ to
turn scan play off.
appears in the display. The track
T.SCAN :OFF
will continue to play.
• If the display has automatically returned to
the playback display, select
pressing
FUNCTION
Note
• After scanning of a CD is finished, normal
playback of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of the
CD.
1 Press
FUNCTION
Press
FUNCTION
display.
2 Press 5 to turn pause on.
appears in the display. Play of the
PAUSE :ON
current track pauses.
3 Press ∞ to turn pause off.
appears in the display. Play will
PAUSE :OFF
resume at the same point that you turned pause
on.
22
En
until appears in the
T.SCAN
again by
T.SCAN
.
to select .
PAUSE
until appears in the
PAUSE

Using disc title functions

You can input CD titles and display the title. The
next time you insert a CD for which you have
entered a title, the title of that CD will be dis-
played.

Entering disc titles

Disc title input lets you input CD titles up to 10
letters long and up to 48 disc titles into the built-
in CD player.
1 Play a CD that you want to enter the title.
2 Press and hold until
FUNCTION
appears in the display.
• When playing a CD TEXT disc, you cannot
switch to . The disc title will have
TITLE IN
already been recorded on a CD TEXT disc.
3 Press 5 or ∞ to select a letter of the alpha-
bet.
Each press of 5 will display a letter of the alpha-
bet in , numbers and symbols in
A B C ... X Y Z
order. Each press of ∞ will display a
3 ... @ # <
letter in the reverse order, such as
order.
To change between upper case and lower case
letters (e.g.,
a b c ... x y z
button. To change to only numbers and symbols
(e.g., ) press the
1 2 3 ... @ # <
ton.
4 Press 3 to move the cursor to the next
character position.
When the letter you want is displayed, press 3
to move the cursor to the next position and then
select the next letter. Press 2 to move back-
wards in the display.
TITLE IN
1 2
Z Y X ... C B A
) press the numbered
1
numbered but-
2