Introduction Of Advanced Built In Cd Player Operation; Repeating Play; Playing Tracks In A Random Order; Scanning Tracks Of A Cd - Pioneer DEH-P5500MP Operation Manual

Section
Built-in CD Player
05
Introduction of advanced
built-in CD player operation
1 RPT indicator
Shows when repeat play is turned on.
2 Function display
Shows the function status.
% Press FUNCTION to display the function
names.
Press FUNCTION repeatedly to switch be
tween the following functions:
RPT (repeat play)RDM (random play)
SCAN (scan play)PAUSE (pause)
FF/REV (search method)TAG (tag display)
# To return to the playback display, press BAND.
Notes
! When playing audio data (CD DA), it is not ef
fective even if you turn TAG (tag display) on.
(Refer to page 23.)
! If you do not operate the function within about
30 seconds, the display is automatically re
turned to the playback display.

Repeating play

Repeat play lets you hear the same track over
again.
16
En
HHHHHHHHHHHHHH
1
2
1 Press FUNCTION to select RPT.
Press FUNCTION until RPT appears in the dis
play.
2 Press a to turn repeat play on.
RPT :ON appears in the display. The track cur
rently playing will play and then repeat.
3 Press b to turn repeat play off.
RPT :OFF appears in the display. The track cur
rently playing will continue to play and then
play the next track.
Note
If you perform track search or fast forward/re
verse, repeat play is automatically cancelled.
Playing tracks in a random
order
Random play lets you play back tracks on the
CD in a random order.
1 Press FUNCTION to select RDM.
Press FUNCTION until RDM appears in the
display.
2 Press a to turn random play on.
RDM :ON appears in the display. Tracks will
play in a random order.
3 Press b to turn random play off.
RDM :OFF appears in the display. Tracks will
continue to play in order.

Scanning tracks of a CD

Scan play lets you hear the first 10 seconds of
each track on the CD.