Description Of Each Menu - BenQ MS521 User Manual

Description of each menu

• The default values listed in this manual, especially on pages 50-58, are for reference only.
They may vary between the projectors due to the continuous improvement to the
products.
FUNCTION
Wall Color
Aspect Ratio
Keystone
Position
Phase
H. Size
Digital Zoom
Operation
50
DESCRIPTION
Corrects the projected picture's color when the projection surface is
not white. See "Using Wall Color" on page 36
There are four options to set the image's aspect ratio depending on
your input signal source. See
for details.
Corrects any keystoning of the image. See
page 27 for details.
Displays the position adjustment page. To move the projected image,
use the directional arrow keys. The values shown on the lower
position of the page change with every key press you made until they
reach their maximum or minimum.
This function is only available when a PC signal (analog RGB) is
selected.
Adjusts the clock phase to reduce image
distortion.
This function is only available when a
PC signal (analog RGB) is selected.
Adjusts the horizontal width of the image.
This function is only available when a PC signal (analog RGB) is
selected.
Magnifies or reduces the projected image. See
searching for details" on page 33
for details.
"Selecting the aspect ratio" on page 33
"Correcting keystone" on
"Magnifying and
for details.