BenQ MS521 User Manual page 52

FUNCTION
Picture Mode
Reference
Mode
Brightness
Contrast
Color
Tint
Sharpness
Operation
52
DESCRIPTION
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See
picture mode" on page 35
Selects a picture mode that best suits your need for the image quality
and further fine-tune the image based on the selections listed on the
same page below. See
for details.
Adjusts the brightness of the image. See
page 36 for details.
Adjusts the degree of difference between dark and light in the image.
See"Adjusting Contrast" on page 36
Adjusts the color saturation level -- the amount of each color in a
video image. See "Adjusting Color" on page 36
This function is only available when a Video or S-Video signal is
selected.
Adjusts the red and green color tones of the image. See
Tint" on page 36 for details.
This function is only available when a Video or S-Video signal is
selected and the system format is NTSC.
Adjusts the image to make it look sharper or softer. See
Sharpness" on page 36
This function is only available when a Video or S-Video signal is
selected.
for details.
"Setting the User 1/User 2 mode" on page 35
"Adjusting Brightness" on
for details.
for details.
"Selecting a
for details.
"Adjusting
"Adjusting