Adjusting The Control Panel Brightness - Oki C931dn User Manual

Adjusting the Control Panel
Brightness
Use the following procedure to adjust the
brightness of the liquid crystal panel.
Memo
z The brightness (backlight) of the liquid crystal panel can
be set individually for during control panel operations and
when in power save mode.
1
Press either the scroll button
on the control panel to display the
"Functions" screen.
2
Press the scroll button
to select the [Admin Setup], and then
press the [OK] button.
3
Use the 10-key pad to enter the administrator
password. The default factory-set password is
"aaaaaa". Press the [OK] button after entering
each individual character.
4
or
5
several times
6
- 35 -
Parts Nomenclature and Functions
Select [Panel Setup], and press the [OK]
button.
When adjusting the brightness for
during control panel operations, select
[Panel Brightness During Operating],
and press the [OK] button.
When adjusting the brightness for when in
power save, select [Panel Brightness While
Power Save], and press the [OK] button.
Press the [ON LINE] button to return to
the standby screen.
1
2
3
4