During Maintenance Or Inspection - Oki C931dn User Manual

„ Other points
z Be very careful to treat the touch panel gently and never hit it. Breaking the surface could cause
malfunctions.
z Be sure to turn the power OFF when leaving the office or if there is a power outage. However, do not
turn the power OFF if the weekly timer is in use.
z Be careful because the paper exit area and paper just after exiting are hot.
z Do not place anything other than paper on the receiving tray. This could disturb a normal operation
and cause malfunctions.
z Do not touch the photoconductive drum and transfer belt. This could cause image problems.
z Do not open/close the covers and the MPT, or pull out the trays during printing.

During maintenance or inspection

WARNING
z Never attempt to repair, disassemble or modify the machine by yourself. You could cause a fire or get
an electric shock.
z Do not let liquids such as water and oil get into the machine when cleaning the floor. This could cause
a fire and give you an electric shock.
CAUTION
z Always keep the plug and outlet clean. Prevent them from accumulating dust and dirt. This could
cause a fire and give you an electric shock due to the heat released by electric leakage.
z Do not touch the stapling area. The actual needle point could cause you personal injury.
„ Other points
z Do not use such solvents as thinner or alcohol when cleaning the surface of the machine.
_ This could warp the shape of the surface or leave it discolored.
_ When using a chemical cleaning pad to clean it, pay attention to any cautionary points.
- 13 -