Recovery Media - Toshiba C660 series User Manual

Bluetooth
For further information on Bluetooth wireless communication, please refer
to Chapter 4,
Problem
Cannot access
Bluetooth device

Recovery Media

Problem
The following message
appears when
executing Recovery
Media Creator.
"The Recovery
Media Creator
can not be
launched
because there is
no recovery
partition."
User's Manual
Operating Basics.
Procedure
Check to ensure the computer's Wireless
Communication function is on.
Procedure
You will see this message if you have previously
chosen to remove the partition and are trying to
create "Recovery Media".
When there is no recovery partition, the
Recovery Media Creator cannot make Recovery
Media.
However, if you have already created a
"Recovery Media", you can use it to restore the
recovery partition.
Simply follow the instructions in
pre-installed software from your created
Recovery Media
Started.
You will be directed to select "Restore Original
Factory Image" from the drop-down menu.
If you have not created "Recovery Media",
please contact TOSHIBA support for assistance.
Troubleshooting
Restoring the
section in Chapter1, Getting
8-16