Placing The Ups In Configure Mode - HP T1000 XR User Manual

This chapter contains information on configuring the UPS. Proper configuration of the UPS is
important in performing other functions on the unit, such as maintaining the battery and
troubleshooting alarms.

Placing the UPS in Configure Mode

The UPS can enter Configure mode while in Operate or Standby mode.
To place the UPS in Configure mode:
1. Remove the front bezel by snapping the bezel off (1).
Figure 3-1: Removing the UPS front bezel
HP Uninterruptible Power System T1000 XR and T1500 XR Models User Guide
HP CONFIDENTIAL Codename: Sherman Part Number: 216164-002 Last Saved On: 8/19/02 4:21 PM
1
Configuration
3
3-1