Yamaha MOXF6 Owner's Manual page 64

Appendix
LCD indication
Now Installing data to Flash
Memory Module
Now loading...
Now saving...
Now working...
Overwrite?
Part ** is used for Drum
Assign.
Part ** is used for Layer.
Part ** is used for Split.
Phrase limit exceeded.
Please keep power on.
Please reboot.
Please stop sequencer.
Power on mode stored.
Quick Setup ** applied.
Read only file.
Receiving MIDI bulk
Sample is too long.
Sample full.
Sample memory full.
Scene & Arpeggio type
stored
Sequence memory full.
Too many fixed notes
Transmitting MIDI bulk
Unrecognized Flash
Memory Module. Please
format that.
USB connection terminated.
USB device connecting
USB device full.
USB device not ready.
USB device read/write error.
USB device write protected.
Utility stored
Waveform full.
Waveform is protected.
64
MOXF6/MOXF8 Owner's Manual
The Sample data is being copied to the Flash Memory Expansion Module.
Indicates that a file is being loaded.
Indicates that a file is being saved.
Canceling the Load/Save operation, after the [EXIT] button has been pressed.
A save operation will overwrite data on the USB flash memory device, and this message confirms whether it is OK to
continue or not.
This message appears when the Part switches of all Parts are set to on, and the Drum Assign function uses Part ** for the
Drum Part in Performance mode. The ** mark indicates the Part number.
This message appears when the Part switches of all Parts are set to on, and the Layer function uses Part ** for the Layer
Part in the Performance mode. The ** mark indicates the Part number.
This message appears when the Part switches of all Parts are set to on, and the Split function uses Part ** for the Split Part
in the Performance mode. The ** mark indicates the Part number.
The maximum number of Phrases (256) has been exceeded when recording, executing a Pattern Job, or editing.
The data is being written to Flash ROM. Never attempt to turn off the power while data is being written to Flash ROM.
Turning the power off while this message is shown results in loss of all user data and may cause the system to freeze (due
to corruption of data in the Flash ROM). This may also result in this instrument being unable to properly start up the next
time the power is turned on.
Please restart this instrument.
The operation you have attempted to execute cannot be done during Song/Pattern playback.
The settings in the Power On mode (pressing the [STORE] and [ENTER] buttons simultaneously) have been stored.
Quick Setup ** has just been applied to this instrument. The ** mark indicates the Quick Setup number.
You have attempted to delete, rename, or overwrite a read-only file.
This instrument is receiving MIDI bulk data.
The Sample size is too large and the load operation cannot be executed.
The maximum overall number of Samples has been exceeded.
The Sample memory is full and further Jobs or load operations cannot be executed.
The Song Scene and current Arpeggio type have been stored to one of the [SF1] – [SF6] buttons.
The internal memory for Sequence data is full, preventing any further operation (such as recording, editing, Job execution,
MIDI reception/transmission, or loading from the external storage device). Try again after erasing unwanted Song, Pattern,
or User Phrase data.
When converting the Song or Pattern data to the Arpeggio data, the amount of different notes in the data to be converted
has exceeded sixteen.
This instrument is transmitting MIDI bulk data.
An unformatted Flash Memory Expansion Module has been recognized. Execute the Format operation.
A break in the connection with the USB flash memory device has occurred because of an abnormal electric current.
Disconnect the device from the USB [TO DEVICE] terminal, then press the [ENTER] button.
Currently recognizing the USB flash memory device connected to the USB [TO DEVICE] terminal.
The USB flash memory device is full and no more data can be saved. Use a new USB flash memory device, or make
space by erasing unwanted data from the USB flash memory device.
A USB flash memory device is not properly inserted in or connected to the USB [TO DEVICE] terminal.
An error occurred while reading or writing to/from a USB flash memory device.
The USB flash memory device is write protected, or you have attempted to write to read-only media.
The settings in the Utility mode have been stored.
The maximum overall number of Waveforms has been exceeded.
You have attempted to load protected Waveform data.
Description