Yamaha MOXF6 Owner's Manual page 42

Quick Guide
5
Press the [F] (Play) button to enter the Step Record
mode.
The [F] button lamp lights and the Step Record display
appears.
6
Set the "Step Time" to "480."
The "Step Time" parameter determines to what position the
pointer will advance after a note has been entered. Here,
the pointer will advance in quarter-note steps.
7
Press the [P] (Top) button to return to the top of
the Song, then press the B0 key four times.
The Bass Drum Kick sound (assigned to the B0 key) is
recorded to the timing of each beat.
NOTE
If you are using the MOXF6, use the [OCTAVE] buttons to
make sure that the Bass Drum Kick sounds when you play
the B0 key. This is necessary since the MOXF6 has a
shorter keyboard and doesn't have a B0 key.
8
Press the [J] (Stop) button to stop recording.
This returns to the Song Play display.
9
To record another percussion sound, press the
[REC] button then the [F] (Play) button to enter
the Step Record mode again.
The [F] button lamp lights and the Step Record display
appears.
10
Set the "Step Time" to "
The Step Time parameter determines to what position the
pointer will advance after a note has been entered. Here,
the pointer will advance in eighth-note steps.
11
Press the [P] (Top) button to return to the top of
the Song, then press the [F3] REST button and
G 1 key four times.
An eighth-note rest is recorded to each down beat and the
Hi-Hat Cymbal sound (assigned to the G 1 key) is recorded
to each up beat.
NOTE
If you are using the MOXF6, use the [OCTAVE] buttons to
make sure that the Hi-Hat Cymbal sounds when you play
the G 1 key. This is necessary since the MOXF6 has a
shorter keyboard and doesn't have a G 1 key.
12
Press the [J] (Stop) button to stop recording.
This returns to the Song Play display.
After executing the above operations (steps 1 – 12), you
should now have a 1-measure drum phrase as shown below.
13
Press the [P] (Top) button, then press the [F]
(Play) button to hear the recorded data.
To stop playback, press the [J] (Stop) button.
42
MOXF6/MOXF8 Owner's Manual
240."
14
Press the [JOB] button, followed by the [F3] EVENT
button to call up the EVENT JOB SELECT display.
To create a four-measure drum pattern (which repeats the
recorded drum phrase), use the Copy Event Job.
15
Select "02: Copy Event" then press the [ENTER]
button.
16
Make the settings as listed below then press the
[ENTER] button to execute the Copy Event Job.
• Source Track = "01" , Source range =
"001:1:000" – "002:1:000"
• Destination Track = "01" , Top measure of the destination =
"002"
• "NumberOfTimes" = "x 03"
Executing this Job will copy the drum phrase (recorded to
the first measure) to the 2nd, 3rd, and 4th measures
respectively.
17
Press in order the [SONG] button, [P] (Top)
button, and [F] (Play) button to hear the recorded
data.
To stop playback, press the [J] (Stop) button.
HINT
Tips in Step Recording
• In Step recording, you can also enter chords. Because notes
are actually entered when the keys are released, make sure
to press all correct keys you want to enter then release the
keys.
• In Step Recording, press the [F] (Play) button to start playback
from the current position. In this status, pressing the [J] (Stop)
button will stop playback and return to the Step Record mode.
• In Step recording, you can create the legato phrases by
setting the GateTime to "100%."
• In Step Recording, you can enter tied notes. For example,
first set the Step Time to "480" (quarter note) then press and
release the key. Next, change the Step Time to "240" (8th note)
then press the [F4] TIE button, resulting in a dotted quarter
note.