Auto Power Off Function; Adjusting The Volume And The Brightness Of The Display - Yamaha MOXF6 Owner's Manual

Setting Up

Auto Power Off function

To prevent unnecessary power consumption, this instrument
features an Auto Power Off function that automatically turns
the power off if the instrument is not operated for a specified
period of time.
 Auto Power Off Setting
The amount of time that elapses before the power is
automatically turned off can be set.
[UTILITY]  [F1] GENERAL  [SF6] OTHER
Instructions:
 Set "AutoOff"  [STORE]
Setting Value off (Disables Auto Power Off), 5, 10, 15, 30,
(min.): 60, 120
Default Setting 30
(min.):
 Disabling Auto Power Off (simple method)
Turn the power on while holding down the lowest key on the
keyboard. A "Auto power off disabled." indication appears
briefly and Auto Power Off is disabled. The setting is retained
even if the power is turned off.
NOTICE
• Even when the power is turned off, electricity is still flowing to the
instrument at the minimum level. To shut off the electricity
completely, make sure you unplug the power cord from the wall AC
outlet.
• Depending on the instrument status, the power may not turn off
automatically, even after the elapse of the specified period of time.
Always turn off the power manually when the instrument is not in
use.
• When the instrument is not operated for a specified period of time
while connected to an external device such as an amplifier, speaker
or computer, make sure to follow the instructions in the Owner's
Manual to turn off the power to the instrument and the connected
devices, in order to protect the devices from damage. If you do not
want the power to turn off automatically when a device is
connected, disable Auto Power Off.
• The setting will revert to its default value if not backed up before the
power is turned off.
• When Auto Power Off is set to "off," the value will be retained even if
the backup data saved on another device is loaded to the
instrument. When Auto Power Off is set to something other than
"off," the value will be overwritten with loaded data.
NOTE
The setting time is approximate.
NOTE
To turn the power on after Auto Power Off has been executed,
press the Standby/On switch once to the Standby position, and
then press it again to the On position.
NOTE
When the factory settings are restored, the setting time is
changed to the default value (30 min.).
18
MOXF6/MOXF8 Owner's Manual
Adjusting the volume and
the brightness of the
display
Adjust the volume levels of this instrument and the connected
amplifier/speaker system.
NOTE
When connecting to a set of powered speakers or PA equipment,
set the MASTER VOLUME to about 70%, then raise the volume of
the powered speakers or PA equipment to the appropriate level.
If the display is not easily visible, press the [INC]/[DEC] button
while holding the [UTILITY] button to adjust for optimum
visibility.
Adjust the volume with the
MASTER VOLUME slider.
Max.
Min.
MOXF6/MOXF8
CAUTION
Do not listen with the headphones at high volume for long periods of
time. Doing so may cause hearing loss.
Adjust the display contrast.