KTI Networks KGS-2401 Installation Manual page 38

trol
configuration, ingress rate control configuration and multicast storm
control
[<portlist>]: Port list (default: All ports).
2. QoS Tosprecedence
Syntax:
QoS Tosprecedence [<portlist>] [<tosprecedencelist>] [low|high]
Description:
Set or show the IP ToS precendence priority mapping.
[<portlist>] : Port list (default: All ports).
[<tosprecedencelist>]: IP ToS precedence list, 0-7 (default: All prece-
dence values).
[low|high] : Internal priority (default: Show priority).
3. QoS Egress Rate
Syntax:
QoS EgressRate [<portlist>] [enable|disable] [<rate>]
Description:
Set or show the Egress rate configuration.
[<portlist>] : Port list (default: All ports).
[enable|disable]: Enable/disable Egress Rate control (default: Show
shaper mode).
[<rate>] : Leaky bucket rate in Kbit/s [250-1000000k] or Mbit/s[1-1000m]
(default: Show EgressRate rate).
4. QoS Ingress Rate
Syntax:
QoS IngressRate [<portlist>] [enable|disable] [<rate>]
Description:
Set or show the ingress rate configuration.
[<portlist>] : Port list (default: All ports).
[enable|disable]: Enable/disable ingress rate control (default: Show
IngressRate mode).
[<rate>] : Leaky bucket rate in Kbit/s [250-1000000k] or Mbit/s [1-1000m]
(default: Show Ingress rate).
5. QoS Storm Control
Syntax:
QoS Storm Control [<portlist>] [enable|disable] [<rate>]
Description:
Set or show the multicast storm control configuration. Multicasts and
broadcasts are controlled using a multicast ingress rate control.
[<portlist>] : Port list (default: All ports).
[enable|disable]: Enable/disable the multicast ingress rate control (de-
fault: Show multicast IngressRate mode).
[<rate>] : Leaky bucket rate in Kbit/s [250-1000000k] or Mbit/s [1-1000m]
(default: Show multicast Ingress rate).
-38-